HANGCHA A Series - Travel

50
7.3 Travel
WARNING
 No turn, inclines when going uphill and downhill.
 Never park on the slope.
 Slow down when going downhill and ready for braking.
 Travel according to regulated route.
 The road should keep clean, no slipping
The truck has two travel modes:
－ Travel in pedestrian mode
－ Travel in rider mode
Travelling in pedestrian mode
Procedure
－ Put down both folding side arms (4).
－ Fold up the operator platform (6).
－ Set the tiller (1) to the travel zone (F).
－ Set the travel switch (18) to the desired travel direction: forward (V) or reverse (R).
When the travel switch is release it automatically returns to its original position.
－ Control the travel speed with the travel switch (18).
CAUTION
 In pedestrian mode the truck can now operate again at normal speed.
Travelling in rider mode
Procedure:
－ Put down both folding side arms (4).
－ Fold down the operator platform (6).
－ Set the tiller (1) to the travel zone (F).
－ Set the travel switch (18) to the desired travel direction: forward (V) or reverse (R).
When the travel switch is release it automatically returns to its original position.
－ Control the travel speed with the travel switch (18).
The brakes are released and the truck moves in the selected direction.
CAUTION
 Operator must wear protective boots.
 When enter narrow area as lift, first get fork go.
 Keep road clean and wipe greasy dirt, water or other easily causes slipping dirty.