61
Hydraulic system D
W
M
T
S
Y
1
Test hydraulic system. ●
2
Check that hydraulic ports, hose and pipe lines are secure, check for
leaks and damage.
●
3
Check cylinders and piston rods for damage and leaks, and make sure
they are secure.
●
4
Check hydraulic oil level and top up if necessary. ●
5
Test emergency lowering system. ●
6
Test relief valve and adjust if necessary. ●
7
Replace hydraulic oil. ●
8
Clean hydraulic oil filter. ●
Mast D
W
M
T
S
Y
1
Visually inspect the mast rollers and check contact surface wear level. ●
2
Check lateral clearance of the mast connections and the fork carriage. ●
3
Check the load chain setting and tension if necessary. ●
4
Check forks or load handler for wear and damage. ●
5
Check the load chain lubrication and lubricate if necessary. ●
6
Test the lift sensor system in the mast and check for damage. ●
To Next Page
Loading...
