64
Change hydraulic oil
– Park the truck at level ground.
– Wipe off oil add and drain plug.
– Unscrew oil add plug (67).
– Place an appropriate container under oil
drain plug (68), unscrew oil drain plug (68),
and drain the oil to the container.
– After oil in the reduction box drains,
re-tighten the drain plug (68).
– Add appointed gear oil (L- HM32) to
allowable scale range. In order to add oil
easily, add with help of funnel and tube.
– Re-tighten oil add plug (67), and clean the
residual oil on the reduction box surface.
WARNING
Handle the exhaust oil according to
relevant rules of the state and never
dump at will.
OIL
67
68
68
68
67
67
To Next Page
Loading...
