25
PARAMETER SETUP
TDS Unit
Option: ppm - ppt or mg/L - g/L
Press the functional key to select the desired TDS unit.
DO Concentration Unit
Option: ppm or mg/L
DO concentration is calculated using % saturation, pressure and temperature.
Press the functional key to select the desired DO concentration unit.
Pressure Unit
Option: psi, mmHg, inHg, mbar, atm, kPa
Press Modify and use the arrow keys to select the desired pressure unit.
Press Select to confirm or the ESC key to return to the previous screen.
Resistivity Unit
Option: Ω·cm, kΩ·cm, MΩ·cm
Resistivity is calculated from the conductivity measurement.
Press the functional key to select the desired resistivity unit.
To Next Page
Loading...
Need help?
General
