2 - Safety notes
2.2
Slow down when driving in uneven terrain as the machine might be in risk of turning over.
Pressure test with clean water prior to filling with chemicals.
Disconnect electrical power before servicing and depressurize equipment after use and before servicing.
Do not attempt to enter the tank.
Do not go under any part of the sprayer unless it is secured. The boom is secure when placed in the transport
brackets.
If an arc welder is used on the equipment or anything connected to the equipment, disconnect power leads befo-
re welding. Remove all inflammable or explosive material from the area.
Never dismount the hose if the machine is in operation. Disconnect the cleaner and the water supply before the
high pressure hose is dismounted.
The External Cleaning Device should not be used if important parts of the equipment have been damaged, inclu-
ding safety devices, high pressure hoses, etc.
Tractor drivers seat is the intended working place during operation.
Label explanation
The labels are designating potential dangerous places on the machine. Anybody working with or in close range of the
sprayer must respect these labels.
The labels should always be clean and readable! Worn or damaged labels must be replaced with new ones. Contact your
local dealer for new labels.
No persons are allowed in the operations area of the sprayer.
DANGER! Do not exceed the max. recommended r.p.m.
To Next Page
Loading...
Need help?
General
