Hardi COMMANDER TWIN FORCE Series User Manual

4 - Sprayer setup
4.10
DANGER! Suction SmartValve must always be turned to the
unused position and turn the pressure SmartValve to “Main
tank” (both levers pointing forward) before opening the
Cyclone filter! If not then spraying liquid can hit you when
opening the filter and drain from the tank!
Standard filter size is 80 mesh. Filters of 50 and 100 mesh are availa-
ble and can be changed by opening the filter top. Check condition
of O-rings and lubricate if necessary or replace if damaged before
reassembly.
CycloneFilter
LookAhead Liquid system

Hardi COMMANDER TWIN FORCE Series Specifications

General

Brand	Hardi
Model	COMMANDER TWIN FORCE Series
Category	Paint Sprayer
Language	English