Hardi HC 8500 User Manual

4 - System setup
4.101
• Rate Setup button
For more information, see “Rate Control Settings” on page 4.101.
Rate Control Settings
Adjust the Rate 1 and Rate 2 settings shown at the Product Control Toolbox on the Map screen, as well as import
application product prescriptions. To access the Rate Control Settings screen, press the Rate Setup button on
the Product Control Toolbox. The Rate Control Settings screen appears.
• Available Products
The top drop-down menu allows you to
select one of the available products to be
applied for your rate control field operation.
This menu shows all of the application
products entered in Product Setup.
• Rate 1 and Rate 2
The Rate 1 and Rate 2 settings represent
preset application rates that allow operators
to quickly change between desired target
rates for each individual product.
Press to enter the desired amount.
• Increment
The Increment button allows operators to
specify the increase or decrease amounts for
a specified rate by using /
on the Product Control Toolbox.
Press to enter the desired increment.
• Prescription
To load a map-based prescription file, press the Prescription button. For more information, see “Loading Prescriptions”
on page 4.104.
• Minimum Flow
Not relevant for HARDI® sprayers (Used for DirectCommand Liquid Applications only).
Rate Control Settings

Hardi HC 8500 Specifications

General

Brand	Hardi
Model	HC 8500
Category	Controller
Language	English