To Next PageTo Next Page
Need help?Do you have a question about the Harman PF100 and is the answer not in the manual?
Warning about hot glass and surfaces during operation and cool down.
Step-by-step instructions for assembling the cold air return filter box.
Procedures for mounting the blower and its brackets onto the furnace.
Steps for installing the firebrick in the ash pan and shelf.
Instructions for installing the upper heat exchanger baffle.
Explains the purpose of venting and the required components.
Specific clearances required for vent terminal placement relative to building features.
Minimum clearances to combustible materials around the furnace and its components.
Guidance on connecting and installing an outside air intake for the furnace.
Instructions for wiring the wall control to the furnace.
Specific requirements for installing the furnace in a manufactured or mobile home.
Guidelines for connecting the furnace to an existing duct system.
Recommendations for sizing supply and return air ducts for optimal airflow.
Information on integrating an air conditioning coil with the furnace.
Procedures for installing and setting up the fan and high limit controls.
Instructions for connecting the furnace to the electrical power supply.
Procedure for checking and adjusting the furnace's low draft setting.
Overview of the furnace control panel and its functions.
Explanation of status light blink codes and troubleshooting.
How to set the desired room temperature using the wall control.
Functionality and indication of the low fuel sensor.
Step-by-step guide for automatically igniting the furnace.
Procedure for manually igniting the furnace if the automatic system fails.
Correct method for properly shutting down the furnace.
Regular cleaning procedures for the burnpot to ensure optimal performance.
Maintenance for the feeder chamber to remove fines buildup.
Instructions for safely removing ashes from the furnace.
Detailed steps for cleaning the internal heat exchanger and firebox.
Procedures for cleaning the combustion blower and its components.
Instructions for operating the heat exchanger cleaning mechanism.
Addresses issues like feeder problems, incomplete combustion, smoke, and low heat output.
General tips for maintenance and operation, including burnpot and ash removal.
Details on what is covered by the warranty and its duration.
Step-by-step procedure for initiating automatic furnace lighting.
General