Control Panels for X75 Systems Installation and Operation Manual 9
Chapter 2: Operation via Front Panel Controls
About the VFD Screen
Menus, options, settings, device information, and feedback display on
the VFD (vacuum fluorescent display) screen. When the
frame-mounted local control panels is first turned on, the VFD screen
starts at the Main menu. When the RCP-X75 starts, the Remote Units
menu appears (see “Navigating Through the Menus” on page 11 for
details.)
A variable display intensity and a screen saver are available to extend
the life of the display device. See page 66 for details about these
features.
Using the Control Knob
and Menu Control Buttons
All menus and device settings for the control panels for X75 systems
can be selected and configured using the control knob and menu control
buttons. Figure 2-2 shows the location of the control knob and various
menu control buttons on the device. Use these items to open and
navigate menus, to scroll through and select options, and to adjust
various parameters and settings. In most menus, when you press the
control knob, it replicates the action of pressing the Enter button. If you
press the control knob while working in numerical parameters, you will
toggle between fine and coarse adjustment modes.
Figure 2-2. Control Knob and Menu Control Area
To Next Page
Loading...