Control Panels for X75 Systems Installation and Operation Manual 53
Chapter 3
Status and Alarm LEDs
Overview
The status and alarm LEDs on the local and remote control panels
provide visual feedback on the current mode and operating conditions
of the unit.
This chapter contains the following information:
• “Genlock Status LED” on page 54
• “EDH Status LED” on page 55
• “TBC Status LED” on page 55
• “Autotrack Status LED” on page 56
• “M-Path Status LED” on page 56
• “Simulcast Status LED” on page 56
• “Major and Minor Alarm LEDs” on page 57
• “Mem Active LED” on page 57
To Next Page
Loading...