Control Panels for X75 Systems Installation and Operation Manual 21
Chapter 2: Operation via Front Panel Controls
Audio Proc Amp Settings
Using control panel shortcuts, you can quickly access the audio level
controls. To do this, press the Ctrl and A Proc buttons simultaneously;
the selected audio input channel’s gain controls become mapped to the
numbered buttons (1 through 16) accordingly. Once mapped, press a
numbered button to enable the gain controls assigned to it.
If you are in M-Path mode and have multiple audio inputs, press Ctrl +
A Proc repeatedly to select the audio proc amp for adjustment (either
SD-SDI 1, HD-SDI 2, Analog, or Digital); the Audio Proc LEDs at the
right side of the front panel will indicate which audio channel is
currently selected. The selected audio input channel’s gain controls
become mapped to the numbered buttons (1 through 16) accordingly.
Figure 2-7. Audio Proc Amp Control Area
Tables 2-2 to 2-7 provide more information on the button mappings of
the different audio inputs (for both mono and stereo control), including
the following:
• Analog audio input
• AES audio input
• SD-SDI audio input
• HD-SDI audio input
To Next Page
Loading...