Control Panels for X75 Systems Installation and Operation Manual 11
Chapter 2: Operation via Front Panel Controls
Navigating Through the Menus
Start-up Screen
Upon start-up, the control panels display the Main Menu, containing
these items:
• Video Setup
• Audio Setup (optional)
• Reference Setup
• Video/Audio Timing
• High End Streaming (optional)
• System Config
• Global Frame Rate
• SD Operating Standard
• HD Output Standard (optional)
See descriptions of these items on page 12.
Controlling Other Frames
To navigate through the menus of different X75 frames, follow these
steps:
1. Press the Remote button.
2. Select the frame you need from the list of IP addresses, and then
press Enter.
The asterisk beside an IP address indicates which frame is currently
represented by the control panel.
3. With the Main Menu of the selected frame displaying, rotate the
control knob to scroll through the menu items.
4. Press the Enter button to open the submenu you have selected.
5. Press the Exit button to go back a step in the menu structure.
6. When you reach a level in the parameter tree where you can select a
value, use the Exit button to store the setting.
To Next Page
Loading...