Harris assuredcommunications X75-RCP - Dimensions and Weight; Network Control; Power Consumption

40 Control Panels for X75 Systems Installation and Operation Manual
Chapter 2: Operation via Front Panel Controls
3. Press Take to activate the selected Freeze mode and apply it to the
incoming video.
The Take button flashes while the Freeze mode is active.
4. Press Take repeatedly to toggle between live and freeze modes.
NOTE
The Mute In Freeze option (Audio menu) specifies whether or not
audio output will be muted while the video is frozen in Frame or
Field mode.
Hue
To adjust the phase, follow these steps (hue phase control is not
available in HD-SDI):
1. Press the Hue button to display the Hue Phase menu on the VFD
panel.
2. Set the hue in the output signal using the control knob and menu
controls. Options include the following:
• Valid range: -180.00 to 179.94
• Default settings: 0.00°
Luma
To adjust the luminance gain, follow these steps:
1. Press the Luma button to display the Luma Gain menu on the
VFD panel.
2. Set the maximum luminance level (in IRE or mV) of the incoming
video signal using the control knob and menu controls. Options
include the following:
• Valid range: -6.00 dB to 6.00 dB (Y/C and SD-SDI)
• Default settings: 0.00 dB
Keyer
This button leads you directly to the HD Logo or SD Logo menu,
depending upon the output standard you are working in.