Control Panels for X75 Systems Installation and Operation Manual 15
Chapter 2: Operation via Front Panel Controls
Using Front Panel Control Shortcuts
Instead of scrolling through individual menus to access parameter
settings, you can use built-in front panel shortcuts. The Audio and
Video LEDs indicate the current focus of control. Whenever audio
parametric adjustments are made, the Audio LED is lit. Whenever
video parametric adjustments are made, the Video LED is lit
The following settings can be made using shortcuts instead of
navigating via the control knob and VFD panel:
• “Video Input” on page 16
• “Audio Input” on page 19
• “Audio Proc Amp Settings” on page 21
• “ARC (Aspect Ratio Converter)” on page 32
• “Black” on page 36
• “Bypass” on page 36
• “Chroma” on page 36
• “FAV1 and FAV2 (Favorites1 and Favorites2)” on page 36
• “Frz Mod (Freeze Mode)” on page 39
• “Hue” on page 40
• “Luma” on page 40
• “Keyer” on page 40
• “Memory” on page 41
• “NR (Noise Reduction)” on page 45
• “Option” on page 46
• “Take” on page 48
• “Timing” on page 48
• “TSG (Test Signal Generator)” on page 49
To Next Page
Loading...