Control Panels for X75 Systems Installation and Operation Manual 67
Appendix B: Display Screen and Device Setup Parameters
Screen Saver Select
The screen saver can be set to either Blank or Default. The Default
screen saver consists of a line of scrolling text.
Shaft Direction
Using this parameter, you can determine whether the clockwise rotation
of the control knob moves a parameter list up or down. The setting of
this parameter only applies to navigation, and does not effect the
adjustment of numeric values. To make numeric values increase, the
control knob must always be turned the knob clockwise. To make
values decrease, you must always turn the knob counter-clockwise.
1 Click Favorite
The Favorites feature has an additional 1 Click Fav capability that
makes it possible for you to directly access the first item in your
favorites list, saving several steps. In this mode, the first item in the
Favorites list appears on the screen directly, and you can execute it by
pressing Enter. To enable the 1 Click Fav capability, select Yes . See
“FAV1 and FAV2 (Favorites1 and Favorites2)” on page 36 for details.
Backlite
This feature illuminates the X75’s buttons in dark locations; buttons
that have been activated when the Backlite is enabled will now flash.
To enable this feature, follow this path:
Option button > Setup > Backlite > On.
To Next Page
Loading...