Control Panels for X75 Systems Installation and Operation Manual 39
Chapter 2: Operation via Front Panel Controls
5. Scroll to Set as GPI Parameter, and then press Enter.
An arrow (>) is placed just before the parameter name, indicating
that the favorite is now set as a GPI-triggered parameter.
The Move Up and Move Down options are used to change the
order of the presets.
1 Click Capability
The Favorites feature has an additional 1 Click Fav capability that
makes it possible for you to directly access the first item in your
favorites list, saving several steps. In this mode, the first item in the
Favorites list appears on the screen directly, and you can execute it by
pressing Enter.
To enable this feature, follow these steps:
1. Press the Option button.
2. Rotate the control knob and then select Setup.
3. Press the Enter button.
4. Scroll to 1 Click Fav, select Ye s, and then press the Enter button.
When 1 Click Fav is enabled, the normal functionality of the Fav 1 and
Fav 2 shortcut buttons (as described on page 36) is locked out. In this
instance, access the Favorites by following this path: Option button >
Favorites 1 or Favorite 2.
Frz Mod (Freeze Mode)
The freeze control provides instant access to freezing individual frames
or fields of the incoming video source. The Freeze mode only affects
the currently active video proc amp block. To use the freeze shortcut,
follow these steps:
1. Press Frz Mode to open a menu in the VFD panel where you can
select a mode to apply to the incoming video.
2. Press Frz Mode multiple times to cycle through the different
modes, or use the control knob. Available modes include the
following:
• Field 1
• Field 2
•Frame
To Next Page
Loading...