Control Panels for X75 Systems Installation and Operation Manual 25
Chapter 2: Operation via Front Panel Controls
M-Path Configuration
Tables 2-6 and 2-7 show the mapped buttons on the control panels and
the parameters affected when you use multiple sources of analog, AES,
SD-SDI, and HD-SDI audio. Use the Ctrl + A Proc buttons to switch
between the audio input types.
Table 2-6. Multiple Audio Inputs Selected
Selected
Inputs
Lit LED
Channels
Lit Audio
Input LEDs
Mapped
Parameters
AA 1/2
1 Analog Gain1, Gain2
AA 3/4
2 Gain3, Gain4
AES 1
3 AES Gain5, Gain6
AES 2
4 Gain7, Gain8
SD 1/2
5 SD Gain9, Gain10
SD 3/4
6 Gain11, Gain12
HD 1/2
7 HD Gain13, Gain14
HD 3/4
8 Gain15, Gain16
Table 2-7. Ctrl + A Proc Buttons Pressed
Lit LED
Channels
Mapped
Buttons on
Control
Panel
Lit Audio
Proc LEDs
1 1, 2 Analog
23, 4
35, 6AES
47, 8
59, 10SD
611, 12
713, 14HD
815, 16
To Next Page
Loading...