18 Control Panels for X75 Systems Installation and Operation Manual
Chapter 2: Operation via Front Panel Controls
• Chroma: Can be mapped to Analog Chroma Gain, SD-SDI 1
Chroma Gain, SD-SDI 2 Chroma Gain, HD-SDI Chroma Gain
• Hue: Can be mapped to Analog Hue Phase, SD-SDI 1 Hue Phase,
SD-SDI 2 Hue Phase
The VFD briefly displays the selected video proc amp block when the
Ctrl and V Proc buttons are pressed simultaneously.
Video LEDs
The three Video Proc LEDS (Analog, SD, HD) on the far right side of
the front panel become active when you set the control panel to adjust
the video parameters. The LEDs indicate which input video processing
block is currently selected for the adjustments under the following
conditions:
•The Analog LED lights when you select the Analog video proc
amp.
•The SD LED lights when you select the SD-SDI 1 or SD-SDI 2
video proc amp. When a shortcut button is pressed, the parameter
prefix on the VFD display indicates which video processing block
is currently active.
•The HD LED lights when you select the HD-SDI video proc amp.
To Next Page
Loading...