Control Panels for X75 Systems Installation and Operation Manual 27
Chapter 2: Operation via Front Panel Controls
Figure 2-8. Default AFV Channel Assignment
You can assign different audio inputs to each SRC channel, as well as
enable and disable the AFV function for each video input to create a
complex routing.
Advanced Audio Inputs and Outputs Selection
For custom applications, the X75 unit provides full input and output
routing control. You can select multiple audio input sources
simultaneously and route them internally to meet your application
requirements (see Figure 2-9 on page 28). This advanced routing can
only be done through the Audio menu (not using a front panel shortcut
button). Each SRC can be assigned to any stereo input source.
Mono-based audio outputs can select any SRC outputs, including the
summation and tones and mutes.
More than one audio input LED will light when multiple audio input
sources are selected (for example, Analog and AES). See the X75HD/
X75SD Installation and Operation Manual for more information.
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
AA1/2 AES1a/1b SDX1/2 SDX1/2AA1/2
AA3/4 AES2a/2b SDX3/4 SDX3/4AA3/4
AA1/2 AES3a/3b
SDX5/6
SDX5/6AA1/2
AA3/4 AES4a/4b
SDX7 /8
SDX7/8AA3/4
AA1/2 AES5a/5b SDX9/10 SDX9/10AA1/2
AA3/4 AES1a/1b SDX11 /12 SDX11/12AA3/4
AA1/2 AES2a/2b SDX13 /14 SDX13/14AA1/2
AA3/4 AES3a/3b SDX15 /16 SDX15/16AA3/4
Cmpst S-Vid CAV SD1 SD2
SRC Input Channels
HDX1/2 HDX1/2 HDX1/2
HDX3/4 HDX3/4 HDX3/4
HDX5/6 HDX5/6 HDX5/6
HDX7/8 HDX7/8 HDX7/8
HDX9/10 HDX9/10 HDX9/10
HDX11/12 HDX11/12 HDX11/12
HDX13/14 HDX13/14 HDX13/14
HDX15/16 HDX15/16 HDX15/16
HDF HD1 HD2
Video Inputs
Toggles between inputs
To Next Page
Loading...