Examination
Chapter VI. Intake and exhaust systems
25
(a)
5. Removing the intake manifold
7. Check for surface damage
(a) Check the intake manifold for cracks or deformation, and
scratches on the mating surface. If there is damage, the
intake manifold must be
(a) Remove 5 screws and 2 nuts, and remove the intake manifold
replacement.
torus
Note:
8. Checking the tightness of the intake system
(a) Do not leak the intake system. This may cause a decrease in
engine power and deterioration of environmental parameters.
In such cases, the intake manifold or intake manifold gasket
may need to be replaced.
ÿ Cover the resulting hole in the engine in the hut
(b) Check throttle body for open or other damage. Check the
smoothness of the dros
zhanie hit foreign objects.
6. Removal and disposal of the intake manifold gasket
village valve.
(c) Check the mating surface of the intake manifold for scratches
and damage.
Machine Translated by Google
To Next Page
Loading...