HCS DAC-42A - CPU 1200,1500: Specification of the Data Buffer Address Based on the Hardware Identifier

DAC-42(A)-x-PN
Page 60
DAC-42(A)-x-PN Manual
Revision: 1.0 22.01.2024
10.4.3 CPU 1200,1500: Specification of the data buffer address based on the
hardware identifier
In contrast to CPU 300, 400, the hardware ID for the GSD I / O module must be assigned to the variable #DEV_ID.
The hardware-ID can be found here:
Please check the correct address of your system and change the value if necessary.
The data buffer address #ADR_IN, #ADR_OUT is predefined in this example at 277.