02/11/98
42
MOUNTING
Surface mounting (Recommended method) . Your
Link 1000
is supplied
with a nesting type mounting place which allows suface mounting using our
exclusive Thin-Mount technology.
Pan head screws go here
Countersunk screws go here
Looking at nesting plate as it mounts on wall
The phone cord to the Freedom inverter
and the wires to the battery compartment
may be led out the back of the nesting
recepticle...
...or they may be led down from the bottom
of the nesting recepticle. No matter
which routing you choose, be sure to use
strain relief on both wires.
To Next Page
Loading...