Unpacking and Setting up 1
TANGO / TANGO XL – Operation 1–11
You should not locate the scanner in the
vicinity of air conditioning units and you
must protect it from humidity and direct
sunlight.
■
Retracting the transport rollers
Once the scanner has reached its final loca-
tion, the rollers must be retracted. To do
this, turn back the screws, until they rotate
freely. You will need a 13 mm wrench for
this.
The scanner must not be moved any more
from now on!
■
Removing the rear bracket
Now retract and then remove the bracket
with the rollers using the 17 mm wrench.
To Next Page
Loading...
