TANGO / TANGO XL – Operation A–3
Reports A
8 Quality Assurance
Heidelberger Druckmaschinen AG requires information
on the quality of a product delivered and on the delivery
procedure to ensure effective product control and qual-
ity assurance and to plan further developments.
Please use the enclosed forms to report general defects
or desired improvements to Heidelberger Druck-
maschinen AG.
0 Installation Report for the Service Technician
The Installation Report is used to evaluate the quality of
the product and of the delivery procedure. This may
also be used to process the modification of the product.
It must be filled out by the person responsible after
every installation and mailed to Heidelberger Druck-
maschinen AG.
■ Specify serial number of all installed machines and
components.
■ List missing parts and errors which occurred during
initial starting. This applies to hardware and soft-
ware.
Listing the missing parts does not cause their subse-
quent delivery. They must be ordered separately.
To Next Page
Loading...
