HEIDENHAIN TNC 426, TNC 430 167
6.6 Path Contours—FK Free Contour Programming
Converting FK programs
You can convert an FK program into HEIDENHAIN conversational
format by using the file manager:
U Call the file manager and display the files.
U Move the highlight to the file you wish to convert.
U Press the soft keys MORE FUNCTIONS and then
CONVERT FK->H. The TNC converts all
FK blocks into HEIDENHAIN dialog blocks.
Circle centers that you have entered before programming
an FK contour may need to be redefined in the converted
program. We recommend that you test the converted part
program before executing it.
FK programs with Q parameters cannot be converted.
To Next Page
Loading...
