HEIDENHAIN TNC 430 - 7.2 Miscellaneous Functions for Program Run Control, Spindle and Coolant; Overview

HEIDENHAIN TNC 426, TNC 430 177
7.2 Miscellaneous Functions for Program Run Control, Spindle and Coolant
7.2 Miscellaneous Functions for
Program Run Control, Spindle
and Coolant
Overview
M Effect Effective at block - start end
M00 Stop program run
Spindle STOP
Coolant OFF
n
M01 Optional program STOP n
M02 Stop program run
Spindle STOP
Coolant OFF
Go to block 1
Clear the status display (dependent
on machine parameter 7300)
n
M03 Spindle ON clockwise n
M04 Spindle ON counterclockwise n
M05 Spindle STOP n
M06 Tool change
Spindle STOP
Program run stop (dependent on
machine parameter 7440)
n
M08 Coolant ON n
M09 Coolant OFF n
M13 Spindle ON clockwise
Coolant ON
n
M14 Spindle ON counterclockwise
Coolant ON
n
M30 Same as M02 n