HEIDENHAIN TNC 430 - Selecting a pallet table; Executing the pallet file

56 4 Programming: Fundamentals of NC, File Management, Programming Aids, Pallet Management
4.4 Advanced File Management
Deleting a file
U Move the highlight to the file you want to delete.
U To select the erasing function, press the DELETE soft
key. The TNC inquires whether you really intend to
erase the file.
U To confirm, press the YES soft key;
U To abort erasure, press the NO soft key.
Deleting a directory
U Delete all files and subdirectories stored in the directory that you
wish to erase.
U Move the highlight to the directory you want to delete.
U To select the erasing function, press the DELETE soft
key. The TNC inquires whether you really intend to
erase the directory.
U To confirm, press the YES soft key;
U To abort erasure, press the NO soft key.