HEIDENHAIN TNC 430 - 12.6 Configuring PGM MGT; Function; Changing the setting

HEIDENHAIN TNC 426, TNC 430 433
12.6 Configuring PGM MGT
12.6 Configuring PGM MGT
Function
With this function you can determine the features of the file manager:
n Standard: Simple file management without directory display
n Expanded range: File management with additional functions and
directory display
Changing the setting
U Select the file manager in the Programming and Editing mode of
operation: press the PGM MGT key
U Select the MOD function: Press the MOD key
U Select the PGM MGT setting: using the arrow keys, move the
highlight onto the PGM MGT setting and use the ENT key to switch
between STANDARD and ENHANCED.
Note: see “Standard File Management,” page 41, and see
“Advanced File Management,” page 49.