HEIDENHAIN TNC 430 - Page 335

HEIDENHAIN TNC 426, TNC 430 309
8.6 SL cycles
11 LBL 1 Contour subprogram
12 L C+40 Z+20 RL Data for the rotary axis are entered in mm (Q17=1)
13 L C+50
14 RND R7.5
15 L Z+60
16 RND R7.5
17 L IC-20
18 RND R7.5
19 L Z+20
20 RND R7.5
21 L C+40
22 LBL 0
23 END PGM C27 MM