352 9 Programming: Subprograms and Program Section Repeats
9.6 Programming Examples
7 L X+15 Y+10 R0 F MAX M3
Move to starting point for group 1
8 CALL LBL 1
Call the subprogram for the group
9 L X+45 Y+60 R0 F MAX
Move to starting point for group 2
10 CALL LBL 1
Call the subprogram for the group
11 L X+75 Y+10 R0 F MAX
Move to starting point for group 3
12 CALL LBL 1
Call the subprogram for the group
13 L Z+250 R0 F MAX M2
End of main program
14 LBL 1
Beginning of subprogram 1: Group of holes
15 CYCL CALL
Hole 1
16 L IX+20 R0 F MAX M99
Move to 2nd hole, call cycle
17 L IY+20 R0 F MAX M99
Move to 3rd hole, call cycle
18 L IX-20 R0 F MAX M99
Move to 4th hole, call cycle
19 LBL 0
End of subprogram 1
20 END PGM UP1 MM
To Next Page
Loading...
