Henry Schein OneStepPlus - Plugging In and Paper Loading; Connecting the Power Supply; Loading Printer Paper

User manual
Manual EN V2.00 / 06-2009 12
3.4 How to plug the instrument in
Pic. 3.4 : Power pack
Pic. 3.5 : DC in
Three adapters are provided for adapting the power pack to the available
mains connection. The adapter matching the mains connection is plugged
on to the power pack (Pic. 3.4). After plugging the power pack cable into
the jack “DC in“ (Pic. 3.3-7) and connecting the power pack to the power
socket the instrument is ready for operation.
3.5 How to load the printer paper
Pic. 3.6 : Printer A
Pic. 3.7: Printer B
Open the printer flap by pressing the rectangular key next to the paper
outlet (Pic. 3.6).