User manual
Manual EN V2.00 / 06-2009 30
8. Quality control testing
Quality control measurements should be performed regularly with check
solutions in order to ensure the correct functioning of the combination of
equipment and test sticks.
Quality inspection tests are recommended:
at the beginning of a day
when introducing a new test stick LOT
in case of doubtful test results
when a different person is operating the equipment
Upon pressing (Display 18-1) on the start menu the “CHECK
MODE“ screen will appear.
8.1 How to review old QC measurements
The equipment saves the results of the last 20 QC measurements in
separate memory. They may be displayed by selecting memory
(Display 19-2) and may be printed for documentation purposes.
To Next Page
Loading...
