User manual
Manual EN V2.00 / 06-2009 33
9.1.2 Units
The instrument can report the results in different units:
Conventional (e.g. 10 mg/dL)
SI (e.g. 56 mmol/L)
ARB, Plus-System (e.g. +++)
Conventional + ARB
SI + ARB
Choose the desired unit from the selective list.
9.1.3 Order of Parameters
The output order of the parameters may be customised via a selective list.
The parameters need to be selected in the desired order and confirmed by
pressing . After the last parameter the equipment will ask whether the
setting is to be saved. Save by pressing or go back to the
preprogrammed order by pressing .
9.1.4 Test Stick LOT
The LOT-administration of the instrument is deactivated in the default
setting. See Chapter 12.2 “LOT activate“.
To Next Page
Loading...
