Henry Schein OneStepPlus - Interface Description; Serial Interface Details; USB Interface and Protocol

User manual
Manual EN V2.00 / 06-2009 47
13. Interface Description
The instrument may be connected to a computer via the RS232 or the
USB-interface (work station or laboratory information system).
13.1 Serial Interface
Protocol RS232, 19200 Baud, 8 bit, no parity (Picture 3.3-4)
Connection plug arrangement:
Pin
Signal
Description
Direction
1
Nc
Not wired
2
RxD
Data reception
Input
3
TxD
Send
Output
4
Nc
Not wired
5
GND
Signal ground
--
6
Nc
Not wired
7
Nc
Not wired
8
Nc
Not wired
9
Nc
Not wired
13.2 USB 1.1-Interface
USB-jack Type B (Pic. 3.3-5). The instrument will be identified as a serial
interface. The driver for the interface module may be downloaded from the
company homepage.
13.3 Transmission Protocol
The data is released via the interfaces as plain text. The received dataset
corresponds to the format of the printout.