User manual
Manual EN V2.00 / 06-2009 7
After approximately 60 sec the result will be displayed on the screen
(Display 2) and transferred to the printer and interfaces.
By pressing the printer symbol (Display 2-2) the result can be printed again.
Choosing the return panel (Display 2-3) will lead back to the start screen.
Another analysis may be started by applying the next test stick.
Notice:
The stick will be drawn into the instrument after 30 sec.
Notice :
To start a new measurement it is not necessary to go back to the start
screen. A new stick is detected at any time and the measurement is
then started automatically.
To Next Page
Loading...
