22
CAUTION:
Overfilling a cartridge can cause Hero to not properly dispense
medication.
4. Return cartridge 1 to slot 1, making sure you feel a “click,” indicating the cartridge
is securely in place.
NOTE:
If there is a label on cartridge 1 that says “Pinch & Pull,” remove it before
returning the cartridge to slot 1.
5. Close the cartridge door. If you have additional medications to load, Hero will
guide you through loading each one. Read previous steps 2-5 to follow along.
6. When finished loading medications, select
Finish
on Hero.
To Next Page
Loading...
