• take all Our authorised dealership
above mentioned precautions like
recommended detergents and usage of
muffler caps/plugs during wash to
ensure quality wash.
Avoid cleaning products that are not
specifically designed for scooter or
automobile surfaces.
• High pressure water (or air) can
damage certain parts of the scooter.
If your scooter is still warm from recent
operation, give time for the engine and
exhaust system to cool down.
They may contain harsh detergents or
chemical solvents that could damage the
metal, paint and plastic parts on your
scooter.
CLEANING
We recommend avoiding the use of high
pressure water spray.
Clean your scooter regularly to protect the
surface finishes and inspect for damage,
wear and oil leakage.
WASHING
1. Rinse the scooter thoroughly with
water to remove loose dirt.
Take care to keep brake fluid or chemical
solvents off the scooter. They will damage
the plastic and painted surfaces.
2. Clean the scooter with a sponge or
soft cloth using water.
NOTE
Avoid directing water to muffler
outlets and on electrical parts.
The inside of the headlamp lens may be
clouded immediately after washing the
scooter. Moisture condensation inside the
headlamp lens will disappear gradually by
lighting the headlamp in high beam.
3. Clean the plastic parts using a cloth or
sponge dampened with a solution of m i l d
d e t e r g e n t a n d w a t e r . R u b t h e
soiled area gently rinsing it frequently
with fresh water.
CAUTION
65
3. Install a new bulb in the reverse
order of removal.
To Next Page
Loading...
