EasyManua.ls Logo

HERO XTREME 200S PROGRAMMED FI - Fuel Tank Operation and Care; Fuel Tank Capacity and Refilling; Fuel Tank Cap Lock and Unlock; Fuel Tank Parking Precautions

HERO XTREME 200S PROGRAMMED FI
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
1. Electric starter switch ( )
Ensure starter switch ( ) is operated when the 1
vehicle transmission is in neutral. If the vehicle
is engaged in gear, press the clutch lever
before operating the starter switch. Release
starter switch after the engine has started.
Right handlebar controls
(1) Electric starter switch
1
Never hold electric starter switch continuously
more than 5 seconds as continuous cranking
of engine will discharge the battery.
CAUTION
!!
2
(2) Engine stop/kill switch
should normally remain in “ON” ( ) position.
During emergency, put the switch to “OFF”
( ) position.
2. Engine stop/kill switch
The engine stop/kill switch (2) is provided
next to throttle grip. The switch has two
positions. In “ON” ( ) position, engine will
operate and in “OFF” ( ) position, engine will
not operate. The prime function of switch is to
stop the engine during emergency (Vehicle tip
over, throttle cable stuck etc.). The switch
WARNING
!!
While riding the vehicle in normal condition,
do not switch off the “Engine stop/kill switch”
to avoid any damage (Wheel locking leading to
accident, part damage, battery discharge etc.).
The ABS indicator (1) on speedometer come
“ON” for 1.8 seconds when the ignition
switch is turned “ON” ( ) & then keeps
blinking until the vehicle attains a speed of 5
km/h.
When the system functions normally indicator
goes “OFF” ( ) once vehicle speed exceeds
5 km/h.
ABS INDICATOR

Related product manuals