30
(1) ABS indicator
1
For the safety of the customer a side stand
indicator (1) is provided.
At any point if ABS indicator remains “ON”
then ABS is not working, but the brakes still
work normally. Reduce your vehicle speed and
visit your Authorised Hero MotoCorp
workshop.
SIDE STAND INDICATOR/SWITCH
(1) Side stand indicator
Ÿ Check the side stand for proper function
and the spring (3) for damage or loss of
tension and the side stand assembly for free
movement.
Ÿ While the vehicle is removed from side
stand, the side stand indicator (1) should
not glow.
Ÿ Check whether the side stand indicator (1)
glows when the side stand is down.
Ÿ If the side stand indicator (1) does not
operate as described in above steps, please
visit your Authorised Hero MotoCorp
workshop.
(2) Side stand switch (3) Side stand spring
2
A side stand switch (2) is provided in the side
stand, when the side stand is down (ignition
switch “ON” ( )), the switch enables the side
stand indicator lamp to glow on the
speedometer panel.
3
1
To Next Page
Loading...
