HERO XTREME 200S PROGRAMMED FI - Vehicle Care - Cleaning and Maintenance; Vehicle Washing Instructions; Importance of Vehicle Maintenance; Maintenance Safety Precautions Overview

40
•
Wet the vehicle with light water spray. Avoid
directing high pressure water spray to meter
console, muffler outlets, electrical parts and
oil cooler.
•
Clean the headlamp lens and other plastic
parts using a cloth or sponge dampened
with a solution of mild detergent and water.
CLEANING AND WASHING OF VEHICLE
•
After cleaning spray water thoroughly.
Follow the below mentioned steps for washing
the vehicle.
•
Dry the vehicle by wiping with dry soft cloth.
NOTE
Our authorized dealership take all above
mentioned precautions like recommended
detergents and usage of muffler caps/plugs
and oil cooler cover during wash to ensure
quality wash.
WARNING
!!
Avoid direct high pressure water spray on any
electrical, electronic components and oil cooler.
MAINTENANCE
To help you, take proper care of your vehicle,
the following pages include a maintenance
schedule and a maintenance record for regular
scheduled maintenance.
The importance of maintenance
A well-maintained vehicle is essential for safe
economical and trouble-free riding. It will also
help reduce pollution.
These instructions are based on the
assumption that the vehicle will be used
exclusively for its designed purpose. Sustained
high speed operation or operation in
unusually wet or dusty conditions will require
more frequent service than specified in the
maintenance schedule. Consult your
Authorised Hero MotoCorp dealer for
recommendation applicable to your individual
needs and use. If your vehicle overturns or is
involved in a crash, be sure that you visit your
Authorised Hero MotoCorp workshop for
detailed inspections.
WARNING
!!
•
Improperly maintaining this vehicle or failing
to correct a problem before you ride can
cause a crash in which you can be seriously
hurt or killed.
•
Always follow the inspection and maintenance
recommendations and schedules in this
owner's manual.
Maintenance safety
This section includes instructions on some
important maintenance tasks. You can
perform some of these tasks with the tools
provided (if you have basic mechanical skills).
Other tasks that are more difficult and require
special tools are best performed by
professionals. It is recommended that wheel
removal should normally be handled by a Hero
MotoCorp authorised workshop.