20
7.5.6 Auto Upload
Click "Auto Print/Upload" from the
System Parameter screen (Figure
2-15) to enter the print/upload
setting screen (Figure 2-21). The
Auto Upload function is disabled
when the button is grayed out. The
Auto Upload function is enabled
when the button is teal. Click " "
to return to the previous screen
and click " " to return to the main
menu. Auto Upload function can
be worked when the analyzer is
connected to PIMS software.
7.5.7 Transport Mode
Click “Transport Mode” from System
Parameter menu (Figure 2-15) to
enter Transport Mode menu (Figure
2-22). When the button is teal,
Transport Mode is turned on; when
the button is grayed out, Transport
Mode is turned off. Transport Mode
is set to On by default to extend the
storage period of the battery. When
using the analyzer for the rst time,
please connect the external power
supply, and the transport mode
then turns off automatically. After
Transport Mode is turned on and
the power is turned off, the system
time will be reset. Please set the
correct system time during the next
reboot. Click " " to return to the
previous screen and click " " to
return to the main menu.
2-21
2-22
To Next Page
Loading...