iCLASS SE Reader Module Hardware Developer’s Guide, SE3200-902, Rev. C.1
Page 9 of 52 February 2014
1.1.3 Product Guide
The iCLASS SE reader module comes in two form factors. It can also be configured for
high frequency card reading only or High & low frequency (prox).
In addition, there are two different levels of security provided.
Key Security Notes:
Standard V1 Security: Standard Security (Version 1) Keyset – coupled with the
Standard 13.56 MHz interpreter provides compatibility with iCLASS SE, iCLASS SR,
standard iCLASS, SE for MIFARE Classic and SE for MIFARE DESFire EV1 credentials.
Standard V2 Security: Standard Security (Version 2) Keyset – coupled with the SIO
(Only) 13.56 MHz interpreter provides compatibility with iCLASS SE, MIFARE Classic
SE and MIFARE DESFire EV1 SE credentials
Elite Security: Elite reads only SE Elite™ credentials with unique matching keys. Works
with iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic and SE for
MIFARE DESFire EV1 with matching Elite keys. Requires ICE reference number.
Prox Reading Notes:
Standard Prox: HID Prox, AWID, EM4102 and Indala (10022 – 26-bit)
Custom Prox: HID Prox, AWID, EM4102 and Indala Custom format
For full ordering information including options, see the Embedded Technology
Solutions How to Order Guide:
http://www.hidglobal.com/documents/embedded_htog_en.pdf.
1.2 Scope/Purpose
This document describes the hardware features of the iCLASS SE Reader Module. The
product is available in two form factors with various different configurations. Form
factor and host connectors are backward compatible to the OEM75 module.
To Next Page
Loading...
