Section 4 - Operating the Rockpicker
8. Place a chain winch around the lower bat
and the reel center rod.
- Tighten the winch to move the bat
against the spring pressure until the
rock is free to be moved.
9. Remove the lodged rock from the apron
area.
10. Loosen the winch to release the
pressure on the bat spring.
11. Remove the winch from the bat and
the center reel rod.
12. Remove the front and rear chains
from the pickup reel.
13. Reconnect the hydraulic hoses.
Winch The Lodged Bat-Remove Spring Pressure
108193
Page 4-11
To Next Page
Loading...
