HIKVISION DS-2CD2432F-I

Installation Manual of Network Camera
26
3.2 Type II Dome Camera
3.2.3 Camera Description
Figure 3-16 Overview
Table 3-2 Physical Description
No.
Description
1
Cover
2
Lens
3
Power LED indicator, It turns solid red when power is connected.
4
Base plate
5
Set screw hole
6
Set screw of lens
7
S & L: Network status indicator.
When the network is connected, the “S” LED is solid yellow, while the “L”
LED flashes orange.
8
RESET Button
Press RESET button about 10s when the camera is powering on or rebooting to restore the default
settings, including the user name, password, IP address, port No., etc.
Lo-Call 1890 866 900
www.cctvireland.ie
shop@cctvireland.ie