User Manual of DS-7200-SH/SV&DS-7300-SH Series DVR
142
Figure 10.14 Set HDD Property
3. Set the HDD property to R/W, Read-only or Redundancy.
4. Click the OK button to save the settings and exit the interface.
5. In the HDD Information menu, the HDD property will be displayed in the list.
Note: At least 2 hard disks must be installed on your device when you want to set a HDD to Redundancy, and
there is one HDD with R/W property.
To Next Page
Loading...
Need help?
General