User Manual of DS-7200-SH/SV&DS-7300-SH Series DVR
43
1. Press PTZ control on the IR remote, or click PTZ Control icon on the quick setting toolbar, to
show the PTZ control toolbar.
2. Choose Patrol on the control bar.
3. Click the patrol you want to call.
Figure 4.10 PTZ Toolbar- Patrol
4.2.5 Customizing Patterns
Purpose:
Patterns can be set by recording the movement of the PTZ. You can call the pattern to make the PTZ
movement according to the predefined path.
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
2. Choose pattern number in the option box.
Figure 4.11 PTZ- Pattern
3. Click , and use your mouse to drag the image or click the eight directional buttons in the control box
To Next Page
Loading...
