User Manual of DS-7200-SH/SV&DS-7300-SH Series DVR
143
10.4 Configuring Quota Mode
Purpose
Each camera can be configured with allocated quota for the storage of recorded files.
Steps
1. Enter the Storage Mode interface.
Menu > HDD > Advanced
2. Set the Mode to Quota.
Note: The device must be rebooted to enable the changes to take effect.
Figure 10.15 Storage Mode Settings Interface
3. Enter the storage capacity in the text field of Max. Record Capacity (GB).
Figure 10.16 Configure Record Quota
4. You can copy the quota settings of the current camera to other cameras if required. Click the Copy button
to enter the Copy Camera menu, as shown below.
Figure 10. 17 Copy Settings to Other Camera(s)
5. Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of
To Next Page
Loading...
Need help?
General