HIKVISION DS-7200-SH Series

User Manual of DS-7200-SH/SV&DS-7300-SH Series DVR
108
Figure 8.6 Copy Settings of Motion Detection
8.2 Setting Sensor Alarms
Note: This section is available for DS-7300HWI/HFI-SH models only.
Purpose:
You can set handling method of an external sensor alarm.
Steps:
1. Enter Alarm Settings interface and select an alarm input.
Menu> Configuration> Alarm
Figure 8.7 Alarm Status Interface
2. Select Alarm Input tab to enter Alarm Input Settings interface and set the handling method of the
selected alarm input.
Check checkbox to enable the alarm input and click to set up its alarm response actions.