User Manual of DS-7200-SH/SV&DS-7300-SH Series DVR
107
4. Set up arming schedule of the channel.
1) Select Arming Schedule tab to set the channel’s arming schedule.
2) Choose one day of a week and up to eight time periods can be set within each day.
3) Click Apply to save the arming settings of the selected day.
4) Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy
button to copy an arming schedule to other days.
Note: Time periods shall not be repeated or overlapped.
Figure 8.4 Set Arming Schedule of Motion Detection
5. Click Handling tab to set up alarm response actions of motion alarm (please refer to Chapter 8.6).
Figure 8.5 Set Alarm Response Actions of Motion Detection
Note: The Trigger Alarm Output option is available for DS-7300HWI/HFI-SH models only.
6. Click OK to complete the motion detection settings of the channel.
7. If you want to set up motion detection for another channel (s), repeat the above steps or copy the above
settings to the channel (s).
Note: You are not allowed to copy the “Trigger Channel” action.
To Next Page
Loading...
Need help?
General