User Manual of DS-7200-SH/SV&DS-7300-SH Series DVR
62
Figure 5.32 Encoding Record
2) Select Camera you want to configure.
3) Check the checkbox of the Redundant Record.
4) Click Apply to save settings and back to the upper level menu.
Repeat the above steps2)-4) for configuring other channels.
5.8 Configuring HDD Group for Record
Purpose:
You can group the HDDs and save the record files in certain HDD group.
Steps:
1. Enter HDD setting interface.
Menu>HDD
Figure 5.33 HDD-General
2. Select Advanced on the left bar.
Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed information,
please refer to Chapter 10.4 Managing HDD Group.
3. Select General in the left bar.
To Next Page
Loading...
Need help?
General